How to Replace Motorcycle Grips
...... location of the inner edge.
4.After the grip has been pulled, clean the handle with rubbing alcohol. Be sure to remove the glue from the Clip-on. Also, lubricate the Clip-on with rubbing alcohol and slide the new grip. While sliding it, do some twisting techniques. Do this while the alcohol has not yet evaporated otherwise it will be harder to twist.
If the new grip material will allow, you can also use oil instead of alcohol.
5.To tap the new grip into position, use the hammer and socket. Make sure that it fits well and will not impair the bike's operation. To test it, roll the throttle to full-on and let it snap back. You can ride around to be used to its stiffness.
Finally, you can enjoy your bike's new look and new grip!
Nb: This web page, "How to Replace Motorcycle Grips", is one of our massive archive of profitable reports written to offer sensible advice on issues of great import. Our expert writers use their knowledge to help and assist you, whatever your area of interest,, but it is not possible to offer really useful assistance wiithout more detailed discussion. Before making any decisions based on the advice given in our How to Replace Motorcycle Grips report, please consult a professional advisor in your state and area of interest. If you think this 'How to Replace Motorcycle Grips' webpage beneficial, please drop us a line and let us know.
|
